Mobile Configuration Documentation

Parameter Description
Ad Type This property is for setting type of ad to be displayed on Ad View. Following are the type you can select from:- 1) IAd - for apple supported ads 2) AdMob - for google AdMob supported ads 3) Flurry - flurry supported ads 4) Tapjoy - Tapjoy supported ads
Allow Data From DataSource Only This property is for enabling auto complete text field or text view selection from data source which was populated on their "LOAD" or "Auto Complete Text View Editing" events. When this option is enabled user can select only form search results filtered from data source associated with auto complete control else user can select their own typed value.
Allow Duplicate Values This property is for enabling selection of same value more than once form auto complete text field control. If this property is enabled user can select a value more than once else user can select a value from search results only once.
Allow Multi Selection This property is for adding check box functionality to Radio Button control group. i.e, user can select multiple options form Radio Button group. If this property is enabled user can select multiple options else user can select only one option at a time i.e, when user makes a selection previous selected radio button will be deselected.
Always Show Mask This property is for enabling showing gradient mask on table view control always if required gradient properties of Table View control. If this property is enabled gradient will be shown on Table View always i.e, when it is scrolled or not else gradient is shown when Table View is not scrolling.
Animate Cancel Button This property is for enabling cancel button animation on Search Bar. If this property is enabled cancel button will be shown when user is editing search bar and will be hidden when user dismisses key board else cancel button will always be shown.
Animate To Back This property is for animating Table View or Grid View tilt backwards. This works only if "Enable Row Animation" is enabled and "Animation Type" property is set to "Tilt". If this property is enabled Table view row or Grid View cell will tilt backwards else they will be tilted towards view point.
Animate To Right This property is for animating Table View or Grid View Wave, Fan or Curl animation from left to right of the screen. This works only if "Enable Row Animation" is enabled and "Animation Type" property is set to "Wave", "Fan" or "Curl". If this property is enabled Table view row or Grid View cell will Wave, Curl or Fan animation will be shown from left to right else from right to left.
Animating View Id This property is for setting "Object ID" of the control which has to animated when Text View grows on text entry.
Animation Duration This property is for setting duration for animation on Table View or Grid View control. Works only if "Enable Row Animation" property is enabled.
Animation Enable This property is for enabling animation of progress on Progress View. If this property is enabled progress change would be animated, else change would happen immediately.
Animation Type This property is for setting 'Animation Type' for showing cells in 'Animated Photo Gallery Detail' control. You can select from following options :- 1) Linear 2) Rotary 3) Cylinder 4) Cover Flow 5) Custom 6) Time Machine 7) Cover Flow2 8) Inverted Wheel 9) Wheel 10) Inverted Cylinder 11) Inverted Rotary 12) Inverted Time Machine
Annotation View Nib Name This property is for setting "Object ID" of view which has to be shown as annotation view(view that will be shown on tapping a pin on Map View) for Map View.
Apply Theme Background Color This property is for enabling theme background color.
Apply Theme Border Color This property is for enabling theme border color.
Apply Theme Text Color This property is for enabling theme text color.
Apportions Segment Widths By Content
Audio Recording View Nib Name This property is for setting Screen Name which has to be shown while recording a n audio.
background image
Background Image Set the image to the Object in Default State
Background Image This property is for setting background image for the control.
Background View This property is for setting "Object ID" of view which has to be shown as background for Table View Cell.
Bar Button Tint Color This property is for setting color for bar button shown on Tool Bar control or Tool Bar shown on picker controls
Bar Code Image Id This property is for setting control or Object ID of the control, on which image of the scan result has to be displayed. Control should be of image container type e.g image view, image picker, button etc
Bar Code Text Id This property is for setting control or Object ID of the control, on which scanned text from bar code has to be displayed. Control should be a of text type control e.g label, text field, text view etc
Border Color This property is for setting border color for a control. Works only if "Border Width" property is set to a value more than 0. Default would be black color.
Border Corner Radius This property is for setting radius with which control's rounded corners should be drawn. If this property is set control will appear with rounded corners.
Border Width This property is for setting border width for a control.
Bottom Inner Gradient Color This property is for setting bottom inner gradient color for Table View.
Bottom Outer Gradient Color This property is for setting bottom outer gradient color for Table View.
Bottom zooming view identifier This property is for setting "Object ID" of view which has to be shown when scroll view is scrolled upwards to the end.
Button Title This property is for setting web service key name whose value has to be displayed as title for Radio Button (comma separated if multiple key names).
Calendar Header View Id This property is for settitng "Object ID" of view which has to be displayed as calendar header view (header part of calendar control shows month, year and day labels (Mon, Tue, Wed, Thu, Fri, Sat, Sun) and month forward and backward navigator buttons).
Calendar Mode This property is for selecting mode for calendar - month or week
Camera Mode This property is for setting camera mode for image picker control. You can select from following options : - 1) Rear 2) Front
Cancel Button Background Color This property is for setting background color for can cel button of Search Bar.
Cancel Button Title This property is for setting title to be shown on cancel button of Search Bar. Default title would be "Cancel"
Cancel Icon Image This property is for setting image for search bar cancel buttton
Caption Data Key This property is for setting web service key name which corresponds to a value that has to be shown as caption for an image shown in Photo Gallery Detail control cell.
Caption View Id This property is for setting "Object ID" of view that has to be shown as caption view for image on Photo Gallery Detail cell.
Cell Left Swipe View Id This property is for setting "Object ID" of control which has to be shown when user swipes from left to right on cell.
Cell Right Swipe View Id This property is for setting "Object ID" of control which has to be shown when user swipes from right to left on cell.
Cell Size This property is for setting diameter for calendar day number cells when "Enable Circular Cells" property is enabled.
Cell Text Color This property is for setting color for text displayed on normal (unselected) day number cell of calendar.
Cell Text Font Name This property is for setting font style for text displayed on each day number cell of calendar.
Cell Text Font Size This property is for setting font size for text displayed on each day number cell of calendar.
Cell View Id This property is for setting identifier of View to be shown as Cells for Animated Photo Gallery Detail control.
Cell View Id This property is for setting identifier of Table View Cell or View to be shown as rows for Table View control or cells for Grid View control.
Character Count Receiver Label This property is for setting "Object ID" of the control on which character count of Text View has to be displayed. If this property is set and "Character Count Enabled" property is enabled.
CIT Keyboard Appearance This property is for setting keyboard appearance for Search Bar. Following are the option you can select from:- 1) Default - light 2) Alert - dark
Clear Icon image This property is for setting image for clear button on Search Bar.
ContentSize_Temp This property is for setting content size for Scroll View in the format {width,height}. For example if you want set to set content size width 320 and height 420 you have to se value as 320,420.
Count Receiver Id This property is for setting "Object ID" of the control on which character count of Text Field has to be displayed. If this property is set and "Text Entry Restrictions" property is set(max_length(length)) for maximum length then the number of characters left (number of characters in Text Field subtracted by maximum characters allowed) would be displayed and if "Text Entry Restrictions" for maximum character length is not set then number of characters in Text Field will be shown .
Current Date Cell Background Color This property is for setting background color for current date indicator cell on calendar in normal state (unselected state).
Current Date Cell Selected Background Color This property is for setting background color of current date indicator cell on calendar in selected state.
Current Date Cell Text Font Name This property is for setting font style for text displayed on current date cell of calendar.
Current Date Cell Text Font Size This property is for setting font size for text displayed on current date cell of calendar.
Current Date Text Color This property is for setting color for text color displayed on current date indicator cell of calendar.
Custom Border Border properties
Custom Font Name
Dash Width For Dashed Border This property is for setting width of each dash in dashed border pattern for a control.
DataSource File This property is for setting json file from which picker data has to be loaded.
Date Display Format This property is for setting the format in which date has to be displayed on control.e.g,"MM/dd/yyyy hh:mm:a" or "HH:mm".
Date Picker Mode This property is for setting mode for date picker. It determines whether the date picker allows selection of a date, time, both date and time or countdown timer. You can select from following options:- 1) DatePickerModeTime - time mode 2) DatePickerModeDate - date mode 3) DatePickerModeDateAndTime - date and time mode 4) DatePickerModeCountDownTimer - count down timer mode (DatePickerModeCountDownTimer mode available for iPhone only)
Date Receiver ID This property is for setting "Object ID" of control on which the selected date has to be shown.If selected value has to be displayed on some control other than the date picker button then you need this property.
Day Indicator Text Color On Header This property is for setting color for text displayed on day indicator (Mon, Tue, Wed, Thu, Fri, Sat, Sun) labels on header view of calender view.
Day Label Text Font Name This property is for setting font style for text displayed on day label of header i.e Mon, Tue, Wed, Thu, Fri, Sat, Sun
Day Label Text Font Size This property is for setting font size for text displayed on day label of header i.e Mon, Tue, Wed, Thu, Fri, Sat, Sun.
Direction Path Color This property is for setting color for direction paths shown on Map View control. Directions can be added using "Show Directions" action.
Disable Interactive PopGesture This property is used to disable pop action while perform back swipe gesture in specific view controller.
Disable Page Change Animation Used to set or reset the animation of the page control when page changes
Disable Selected Text Display This property is for disabling display of selected text from multi data source picker on picker button.if this property is enabled user selection will not be displayed on receiver else selection will be displayed on receiver(s) if "Picker Selection Receiver IDs" is set else selection will be shown on multi data source picker button.
Disable Sorting This property is for disabling sorting of data source associated with Table View or Grid View controls if "Section Key" property is set. If this property is enabled datasource will not be sorted if "Section Key" property is set else datasource will be sorted based on the key set in "Section Key" property.
Disable Sorting This property is for disabling sorting of datasource for picker controls. If this property is set datasource will not be sorted else datasource will be sorted based on the key set in "Key Name To Data" property.
Dismiss Keyboard On Selection This property is for enabling dismissal of keyboard when user selects a suggestion from autocomplete text field suggestions. If this property is enabled keyboard will be dismissed on selection else not.
Display Admob On iAD Fail if you checked this option admob will display if iAD fails to load
Display Cell In Square This property to display grid cell in square with respect to either width or height. Following are the type you can select from:- 0)None:- Cell will display respective to screen width and height 1)Width:- Cell will display in square related to width 2)height:- Cell will display in square related to height
Display Data In Reverse Order This property is used to display graph in reverse order of data.
Display Day Label Text In Capitals This property is for showing day labels in capitals. If this property is enabled text on day labels will be shown in capitals i.e, MON, TUE, WED, THU, FRI, SAT, SUN else will be shown with initial capitals i.e, Mon, Tue, Wed, Thu, Fri, Sat, Sun.
Display/Image
Divider Image This property is for setting image that has to be displayed as divider between two segments.
Dot Color This property is for setting color for the dot(s) displayed on normal(unselected) cell of calendar.
DropDown Table Background Image This property is for setting image to be displayed as background for suggestions Table View of Auto Complete text view control.
Dropdown Table BackgroundColor This property is for setting background color for suggestions Table View of Auto Complete text view control.
Dropdown Table Separator Color This property is for setting separator color for suggestions Table View cells of Auto Complete text view control.
Dropdown Table Separator Image This property is for setting image to be displayed as separator for suggestions Table View cells of Auto Complete text view control.
Dropdown Table TextColor This property is for setting text color for search results displayed on each row of suggestions Table View shown below Auto Complete Text View.
Dynamic Cell Base ID This property is for setting "Object ID" of control based on whose text cell's height has to be calculated.
Dynamic Height Enable This property is for enabling dynamic height for Table View or Grid View controls based on number of cells. Maximum height would be the value set in "Height" property.
Dynamic Height Enable In Cell This property is for enabling dynamic height for Table View cell based on the text of control set in "Dynamic Cell Base ID" property.
editing
Empty Data Representation View Id This property is for setting "Object ID" of control which has to be shown when there is no data available to show in Table View,Grid View,Animated Photo Gallery Detail controls.
Enable All Option Selection This property is for displaying an additional row in multiple selection picker, on tapping which, all rows in it will get selected. If "Select All options Row Title" property is set additional row text will be value set in "Select All options Row Title" else additional row text will be "All".
Enable Attributed Text This property is for enabling attributed string as text on label. This features lets you apply sets of attributes (font, color, size, h_color) to individual characters or range of characters in label text string. This feature is useful when you want to highlight a part of label text using different color and(or) font style. For enabling this feature enable “Enable Attributed Text” property. You are required to set text with proper syntax for this to work. For example :- “text1”, “text1 text2
Enable Audio Player This property is for enabling audio player functionality.
Enable Bottom Mask This property is for enabling gradient bottom mask.
Enable Cell Left Swipe Animation This property is for enabling left swipe animation on cell. Works only if "Left Swipe First Color" and "Left Swipe Second Color" or "Left Swipe First Icon Image" and "Left Swipe Second Icon Image" properties are set.
Enable Cell Right Swipe Animation This property is for enabling right swipe animation on cell. Works only if "Right Swipe First Color" and "Right Swipe Second Color" or "Right Swipe First Icon Image" and "Right Swipe Second Icon Image" properties are set.
Enable Character Count This property is for enabling character count display in Text View. If this property is enabled and "Maximum Character Count" property is set then the number of characters left (number of characters in Text View subtracted by maximum characters allowed) would be displayed and if "Maximum Character Count" is not set then number characters in Text View will be shown .
Enable Circular Cells This property is for enabling circular day number cells on calendar.
Enable Deletion Of All Tiles on Long Press This property is for enabling multiple tile deletion on long press. If this property is enabled when user long presses on a tile, delete button would appear on all tiles and user can delete multiple tiles.
Enable Deletion On Long Press This property is for enabling single tile deletion on long press. If this property is enabled when user long presses on a tile delete button would appear on that tiles and user can delete that tile by tapping on delete button.
Enable Directions
Enable Dotted Grid This property is for enabling plotting of dotted grid lines. If this property is enabled grid lines will be plotted as dotted lines else grid lines will be plain lines.
Enable Dynamic Height This property is for enabling dynamic height for the control.i.e, height of the control will be set based on its text content.
Enable Dynamic Width This property is for enabling dynamic width for the control.i.e, Width of the control will be set based on its text content.
Enable Editing A boolean variable for enabling image editing
Enable Emoji This property is for showing emoticons on label
Enable Events This property is for showing event indicator dots on cell
Enable Fast Scroll This property is for enabling fast scroll.
Enable Google Map
Enable Html Label Enable html in label
Enable Image Cropping This property is for enabling cropping for selected image.
Enable Image Detailing A boolean value that allows to view the image in full size.
Enable Image Editing
Enable Long Press
Enable Marquee effect on Label Enable marquee effect on lable
Enable Odd Even TableCell Background
Enable Online Search A boolean value which will be used to provide search online
Enable Paging
Enable Partial Selection
Enable Pause/Play On Tap
Enable Range Slider This property is for enabling dual thumb for enabling range selection from slider.
Enable Right To Left A view that is always displayed using a right-to-left layout.
Enable Row Animation Used to allow animation while scrolling
Enable Scaling This property is for enabling scaling(step values) for slider.
Enable Search This property is for enabling search for picker view options. i,e, a search bar is added on picker tool bar where user can type a search query based on which picker options will be filtered.
Enable Single Selection This property specifies whether selection should be single selection or not. i.e only one value can be selected at a time if this property is enabled.
Enable Slide Show This property is for enabling slide show of tile in photo gallery.
Enable Static Height This property is for eanbling static height for calendar. Cell size height will be adjusted according to number of cells in a month, height of calendar will remain same. If this is disabled cells size remain same and heigh of caledar will be changed according to number of cells in a month
Enable Street View This property specifies of street view of a location should be shown, if available. Works only if "Enable Google Map" property is enabled or "Enable Google Map" setting is enabled in "MAP" config under "Other Setting" tab and "Google Map API Key" is set in "MAP" config.
Enable Top Mask This property is for enabling gradient top mask.
Enable Underline This property is for enabling underline for text displayed on label or button. Underline color will be the color set in "Under Line Color" property and if "Under Line Color" property is not set then underline will be in text color of the control.
Enable Vertical Navigation This property is for enabling vertical navigation on view.
Even Number CellView Background Color
Even Number CellView Background Image
Events Data Source Key This property is for setting key name from web service for displaying dots.
Expand Button Identifier This property is for setting "Object ID" of control on tapping which, expandable table section will be opened/closed.
External Play Button Enable This property is for enable external play button on video player. i.e, a button will be added in the middle of video player, on tapping which video playback will start. Works only "Should Play Video In MPMoviePlayer" property is enabled. If can set image for this play button using "External Play Button Enable" property.
External Play Button Image This property is for setting image for play button on video player control. Works only "External Play Button Enable" and "Should Play Video In MPMoviePlayer" properties are enabled.
FastScroll Margin
Footer Animating Image Identifier This property is for setting "Object ID" of Image View control that should rotate when view is scrolled upwards. Object set in this property should be a sub view of footer view set in "Footer View Id" property. Works only if "Enable Vertical Navigation" property is enabled.
Footer View Id This property is for setting "Object ID" of View that should be shown as footer when view is scrolled upwards. Works only if "Enable Vertical Navigation" property is enabled.
From Camera This property is for enabling device camera for image capture.
From Camera This property is for enabling device camera for video capture. Works only if "Enable Video Selection" property is enabled.
From Gallery This property is for specifying whether image source is internal device Gallery(Memory Card)or not.
From Gallery This property is for enabling video selection from device gallery.
From Gallery This property is for enabling audio files from gallery ( memory card)
Gradient Properties Gradient properties group.
Graph Type This property is for setting type of the graph to be displayed. You can select from following options :- 1) Bar Chart 2) Scatter Plot 3) Curved Scatter Plot 4) Stepped Scatter Plot 5) Gradient Scatter Plot 6) Pie Chart 7) Donut Chart
Grid Horizontal Scroller Enable
Grid Paging Enable A boolead to enable paging inside gridview
Group Name This property is for setting identifier for a group of Radio Buttons. "Group Name" property for all radio buttons of same group should be set to same value.
Has Navigation Detail View This property is for specifying if this instance of view has a navigation detail view i.e, on some event of any of the controls on this screen, user will be redirected to other screen and new screen(redirected screen) requires data source of this screen.
Has TabBar This property is for specifying whether tab bar has to be shown on current screen or not.
Header Animating Image Identifier This property is for setting "Object ID" of Image View control that should rotate when view is scrolled downwards. Object set in this property should be a sub view of header view set in "Header View Id" property. Works only if "Enable Vertical Navigation" property is enabled.
Header Offset From Calendar This property is for setting distance between header view and cells of calendar.
Header Text Font Name This property is for setting font style for text displayed on month year label of header. This is for setting font for default header. If "Calendar Header View Id" property is set this property will be ignored.
Header Text Font Size This property is for setting font size for text displayed on month year label of header. This is for setting font for default header. if "Calendar Header View Id" property is set this property will be ignored.
Header View Id This property is for setting "Object ID" of View that should be shown as header when view is scrolled downwards. Works only if "Enable Vertical Navigation" property is enabled.
Hide Cell Border This property is for disabling cell border. If this property is set cell border will not be shown.
Highlighted Cell Background Color This property is for setting background color for cells which were selected from web service response data on "LOAD" event based on value of key name set in "Key Name To Data" property.
Highlighted Cell Text Color This property is for setting text color for cells which were selected from web service response data on "LOAD" event based on value of key name set in "Key Name To Data" property.
Horizontal Grid Line Color This property is for setting color for vertical grid lines of graph plot area.
Image Cap Insets This property is for setting image cap insets. Should be in format {top,left,bottom,right} e.g, {16,0,16,0} which implies that you want to set top image cap inset to 16, left image cap inset to 0, bottom image cap inset to 16 and right image cap inset to 0.
Image Picker Image Receiver Id This property is for setting "Object ID" of control on which selected image has to be shown.
Image Shape
Image should stretch
Image Size For Post This property is for setting cropping size. The selected image will be cropped to size set in this property. Size should be set in format {width,height} e.g, "100,100".
Inactive Cell Background Color This property is for setting background color for inactive(cell indicating days in next or previous month) cells on calendar.
Indexing Enable This property is for enabling indexing. Works only if "Sections Enable" property is enabled.
Indoor Enabled This property specifies whether indoor maps should be shown, if available. Works only if "Enable Google Map" property is enabled or "Enable Google Map" setting is enabled in "MAP" config under "Other Setting" tab and "Google Map API Key" is set in "MAP" config.
Initial Open Section Index This property is for setting index of section that should be opened initially.
Initial Rating Value This property is for setting initial rating to be shown on rating view. Should be value between 0 and number of stars in rating view.
InitialZoomScale
Input Accessory View Id This property is for setting "Object ID" of Control to be displayed on keyboard when keyboard appears.
InputViewId This property is for setting "Object ID" of the control which should be displayed instead of keyboard.
Is Growing TextField This property is enabling growing text field behaviour on this control. i.e, text field would grow when user enters text in it.
Is pie slice label rotation relative to radius This property is for enabling rotation of text labels on pie slices to be relative to radius.
Is Sticky Header This property used to specifying that HBView is a sticky header in scroll view or not
Is Toggle Button This property to set button behaviour as checkbox. To work as check box you need to set image for normal and selected states.
Keep SelectedCellStyle as Selected This property is used to keep selection effect on cell after selecting a cell in table.
Key Name to Cell Color Name of key in WS response which has color hex string value that has to be displayed as highlighted cell background color
Key Name To Data Set the web service key to display data received from web server.
Key Name To Data Display key name for text to be displayed on picker or auto text view
Key Name To Detail Image Set the web service key to display full size image from web server in detail screen.
Key Name To Image Description Description for image shown as caption when enlarged image is shown.
Key Name To Location Description Set the web service key for description which will be displayed in callout
Key Name To Location Latitude Set the web service key for latitude of annotation
Key Name To Location Longitude Set the web service key for longitude of annotation
Key Name To Location Title Set the web service key for title which will be displayed in callout
Key Name To Pie Slice Text
Key Name to Plot Data Name of the key in datasource which having input data for plot
Key Name To Plot Name Name of the key in datasource which having name or details of data for plot
Key Name To Search Set the web service key based on that searching will be done
Key Name To Sort Set the web service key based on that sorting will be done
Key to Data Index Web service key data which will be retrieved as output based on selection
Key To DataSource Web service key which will be used as data source for control
Key To Maximum Value Set the web service key having maximum value
Key To Minimum Value Set the web service key having minimum value
Key To Stepper Step Value
Label Text Vertical Alignment This property is for setting text alignment vertically. Following are the values you can select from:- 1) Center 2) Top 3) Bottom
Left Call Out Accessory View Id This property is the "Object ID" of the view or control that should be shown as left accessory view on default callout that is shown when a pin is tapped on map.
Legend Background Color This property is for background color legend.
Legend Font Color This property is for setting color for text displayed in legend.
Legend Font Name This property is for setting font name for text displayed in legend.
Legend Font Size This property is for setting font size for text displayed in legend.
Line Spacing
Load More View Id
Load More View Id This property is for setting "Object ID" of view that has to be shown as footer for Table or Grid view when user scrolls down to the end for loading next page. Works only if "page token Id" property is set, "Paging Enable" property is enabled and "Table Load Next Page" event is configured.
Local File Name This property is for setting json file from which auto complete data has to be loaded.
Local Image Folder Name This property is for setting image path if image is already downloaded. e.g /Documents/ProfileImages/
Local Video This property is for uploading video to be played in Video Player.
Locale This property is for setting locale in which dates will be displayed inside picker.
Location to display on load This property is for setting latitude and longitude string of the location to be displayed initially on map view. Value set in this property should be in format {latitude,longitude} e.g, "28.0000,72.0000".
Map Function This property specifies the function that the map should perform i.e, address locator, default map that shows pins, global location search or local search . You can select from following options:- 1) Default - Default map that shows pins and callouts when pin is tapped. 2) Address Locator - Map with single pin on current location will be shown. User can can and drop the pin anywhere on map and that location details will be fetched and stored in session with following keys :- -> search_location_lat -> search_location_lon -> search_postal_code -> search_location_country -> search_location_state -> search_address 3) Global Location Search - Map with single draggable pin and search bar will be shown. User can search for a location by typing location name in search bar or dragging and dropping pin in desired location. If user searches for location by tying location name in search bar a table view with search results will be shown below search bar from which, user can select a location and on selected location pin will be dropped and complete location details will be saved in session with keys provided above for "Address Locator" type. Drag and drop of pin will work same like "Address Locator" type. 4) Local Search - This function will some same like "Default" type map but additionally a search bar will be shown. User can search for a pin which are added on a map by typing location name in search bar. User be zoomed to the pin(s) which matches the search criteria
Map View Data File This property is for setting JSON file from which map data has to be taken.
Marker Symbol Fill Color This property is for setting color to fill in marker symbols of scatter plot.
Marker Symbol Size This property is for setting size of marker symbol of plot.
Marquee Type
Maximum Character Count This property is for setting the count to display the number of characters that can be typed in the Text View when it is empty and when some text is entered in Text View number of characters left(Number of characters in Text View subtracted by value set in "Maximum Character Count" property) will be displayed. Works only if "Enable Character Count" property is enabled.
Maximum Date This property is for setting the maximum date that can be selected form date picker or calendar. Following are the ways in which you can set maximum date :- 1) Directly provide a date string in the format set on "Date Format" or "Selected Date Format" property. 2) Set "Object ID" of another date picker if selected date from other date should be set as maximum date for this date picker or calendar control. 3) Set "today" if you want to set current date as maximum date. 4) If you want to set a date based on current date i.e, some date after or before current date, use format like "{today}+2d"(two days added to current date), "{today}-2d"(two days subtracted from current date), "{today}+1y" (1 year added to current date), "{today}+1y"(3 months added to current date). 5) If you want to set a date based on date selected from some other date picker control i.e, some date after or before date selected from other picker, use format like "{DATE_PICKER1}+2d"(two days added to selected date), "{DATE_PICKER1}-2d"(two days subtracted from selected date), "{DATE_PICKER1}+1y" (1 year added to current date), "{DATE_PICKER1}+1y"(3 months added to selected date).
Maximum Number Of Dots This property is for setting maximum number of dots to be displayed on calendar cell.
Maximum Number of Image Selection Allow user to select maximum number of images. User can not select more than given number of images.Default number of maximum image selection is 2.
Maximum Number Of Lines This property is for setting maximum number lines till which growing text view has to grow. After reaching maximum lines limit ext view will not grow further. If this property is not set maximum number of line will be 4.
Maximum Space Between Items This property is for setting maximum space between two tiles in gallery.
Maximum Track Image
MaximumTrackImage This property is for setting maximum track image.
Media Picker Type Select Media Type to open Image Selection, Video Selection or Audio file selection.
Media Playback AllowsAirPlay
Media PlaybackRequires UserAction This property is for enabling user user interaction for playing video. If this property is enabled, video will not be played until user taps play button.
Minimum Date This property is for setting the minimum date that can be selected form date picker or calendar. Following are the ways in which you can set minimum date :- 1) Directly provide a date string in the format set on "Date Format" or "Selected Date Format" property. 2) Set "Object ID" of another date picker if selected date from other date should be set as minimum date for this date picker or calendar control. 3) Set "today" if you want to set current date as minimum date. 4) If you want to set a date based on current date i.e, some date after or before current date, use format like "{today}+2d"(two days added to current date), "{today}-2d"(two days subtracted from current date), "{today}+1y" (1 year added to current date), "{today}+1y"(3 months added to current date). 5) If you want to set a date based on date selected from some other date picker control i.e, some date after or before date selected from other picker, use format like "{DATE_PICKER1}+2d"(two days added to selected date), "{DATE_PICKER1}-2d"(two days subtracted from selected date), "{DATE_PICKER1}+1y" (1 year added to current date), "{DATE_PICKER1}+1y"(3 months added to selected date).
Minimum Space Between Items This property is for setting minimum space between two tiles in gallery.
Minimum Track Image
MinimumTrackImage This property is for setting minimum track image.
Minus Off Image This property is for setting image for minus side of Stepper in disabled state.
Minus On Image This property is for setting image for minus side of Stepper in enabled state.
Minute Interval This property is for setting the interval at which the date picker should display minutes.This is available for iPhone platform Only.
Month Year Displaying Label Id This property is for setting "Object ID" of label control (sub view of header view) on which month and year of calendar should be displayed.
Month Year Header Text Format This property is for setting format in which month and year on calendar header should be displayed. e.g "MMM - YY" should be set for displaying like "JUN - 14". Defaults to "MMMM yyyy".
Multiple DeSelection Indicator Image This property is for setting image that should be displayed on the unselected row.
Multiple Selection Indicator Image This property is for setting image that should be displayed on the selected row.
Multiple Selection Picker Receiver Enable This property is for enabled selected values display. i.e, displaying comma(,) separated selected values , on the control, by tapping on which the picker is displayed or on the control whose "Object ID" is specified in "Picker Selection Receiver IDs" property.
Multiple Selection Session Key This property is for setting name of the key with which selected values should be stored in session.
Multiple Selection View Id This property is for setting "Object ID" of control whose click you want to provide multiple selection.
Navigation Button Forward This property specifies if this button instance, is forward button or not. i.e, on tapping on this, next page has to be displayed or previous page has to be displayed. For backward navigation button this property has to be disabled.
Normal Cell Border Color This property is for setting border color for normal (unselected) cell on calendar.
Number Of Stars This property is for setting number of rate stars to be shown for rating view.
Object ID This property is for setting the unique identifier for the object.
Object Parent ID This property is for setting "Object ID" of control which contains this control.
Odd Number CellView Background Color
Odd Number CellView Background Image
Off Image This property is for setting image for switch OFF state.
Off Text This property is for setting text for switch OFF state.
On This property is for setting default state for switch. If this property is enabled switch will be in ON state else it will be in OFF state.
On Image This property is for setting image for switch ON state.
On Text This property is for setting text for switch ON state.
On Tint Color This property is for setting tint color for switch ON state.
Padding Used to set space between two tiles
Padding for selected pie slice Padding for the selected pie slice in pie chart
Page Control Circle Radius Set the radius of the circles
Page Control Off Image
Page Control On Image
Page Control Stroke Color Used to set the color of the circle draw strock
Page Control Stroke Width Used to set the stroke width of page control
page token Id A WS key name based on which paging will be done (ex:next_page)
Picker First Option Title A string which will be shown on top most of all data populated in picker
Picker Numerical Bounds String To show numeric value in picker for selection (ex: 0-100)
Picker Selection Receiver IDs
Picker Tool Bar Style
Picker Tool Bar Tint Color Used to set tint color of toolbar of picker
Picker Tool Bar Title Title shown on center of toolbar when picker appears
Picker Tool Bar Title Color Used to set text color of title shown on center of toolbar when picker appears
Pie Slice Label Font Color Color of font for labels on pie slices
Pie Slice Label Font Name Font name for labels on pie slices
Pie Slice Label Font Size Size of font for labels on Pie Slices
Pin Color Used to set pin color of pin (ex:1,2,3). Specify image name to show image as pin
Place Holder Image Set dummy image to display while image data is being received from web server.
Place Holder Text The string that is displayed when there is no other text in the object.
Place Holder Text Color
Plot Background Color BackGround color of plot area
Plot Border Color Color of plot area border line
Plot Border Padding value of padding for plot area
Plot Border Width Value of width for plot area border line
Plot Color Code Color for the data plot
Plot data range Use this property to specify the range of data to be displayed on graph
Plot Line Width Width of line for line chart
Plot Marker Symbol Marker symbol for line chart
Plus Off Image
Plus On Image
Popover Background Image
Popover Content View ID
PopOver Customization
Popover Shadow Enable
Popover Tint Color
Progress Bar Progress
Progress Image
Progress Time Out
Pull Down Refresh Enable
Range Slider Highlighted Thumb Diameter Multiplier This property is for setting multiplier for highlighted thumb diameter.
Range Slider Thumb Diameter This property is for setting diameter for range slider thumbs.
Range Slider Track Height This property is for setting track height of range slider
Relative View Id This property is for setting "Object ID" of the control, whose frame should be changed when ad disappears(stops displaying ad).
Remove Button Required This property specifies if remove button should be shown on selected values or not.
Right Call Out Accessory View Id This property is the "Object ID" of the view or control that should be shown as right accessory view on default callout that is shown when a pin is tapped on map.
Row Animation Row animation properties
Row Animation Start Position This property is for setting start position on screen for row animation in percentage (1 to 100). Works only if "Row Animation Type" is set to "Flip", "Wave" or "Fan" animation and "Enable Row Animation" property is enabled.
Row Animation Type This property is for setting animation style for rows when they are scrolled. Works only if 'Enable Row Animation' property is set. You can select from following options:- 1) Curl 2) Fade 3) Fan 4) Flip 5) Helix 6) Tilt 7) Wave
Row View Id This property is for setting "Object ID" of view that has to be shown as row for picker view.
Scatter Plot Gradient Color This property is for setting gradient color for line chart.
ScrollsToTop
Search Bar Background Image This property is for setting background image for search bar.
Search Icon Image This property is for setting image for search icon. (Magnifying glass icon)
Search Text Color
Search Text Field BackGround Image This property is for setting background image for search text field .
Search Text Field Image This property is for setting search text field image.
Search Text Font Name This property is for setting font for search bar.
Search Text Font Size This property is for setting font size for search text.
Search Type This property is for setting search criteria to be applied while searching. Following are the option you can select form:- 1) Begins With :- Returns are values that begin with search string 2) Any Where :- Returns are values that contain search string
Section Corner Radius Enable This property is for enabling cornered border for sections. Works only if "Border Corner Radius" property is set.
Section Header Background Image This property is for setting background image for header of sections. Works only if "Sections Enable" property is set.
Section Header Color This property is for setting background color for header of sections. Works only if "Sections Enable" property is set.
Section Header View ID This property is for setting "Object ID" of view to be shown as header of sections. Works only if "Sections Enable" property is set.
Section Index Tracking Background Color This property is for setting background color for table view’s section index view when it is touched.
section Index Color
Section Key This property is for setting web service key name based on whose value we have to group data source into sections. Works only if "Sections Enable" property is enabled.
Sectional Data is Single Charcter This property is for displaying single character in sectional header and sections will be grouped based on alphabet.
Sections Enable This property is for enabling sections. Works only if proper key is set in "Section Key" property.
Sections Enable This property is for enabling sections. Works only if proper key is set in "Section Key" property.
Segment Titles This property is for setting titles for segments of segmented control. Titles should be separated with string set in "Titles Separator" property. If "Titles Separator" property is not set , titles should be separated with "|||" string.
Select All options Row Title This property is for setting the title for All Option selection row i.e, on tapping of this row all options in picker will get selected. Default value for this is "All". Works only if "Enable All Option Selection" property is enabled.
Selected Background Color This property is for setting background color for selected segment.
Selected Background Image This property is for setting background image for selected segment.
Selected Background View This property is for setting "Object ID" of view for setting as background view of cell in selected state.
Selected Cell Background Color Background color of user selected cell on calendar.
Selected Cell Border Color This property is for setting border color for selected cell on calendar.
Selected Cell Font Name This property is for setting font style for text displayed on selected cell of calendar.
Selected Cell Font Size This property is for setting font size for text displayed selected cell of calendar.
Selected Cell Text Color This property is for setting color for text displayed on selected cell of calendar.
Selected Date Format This property is for setting date format for selected date. e.g, "MM/dd/yyyy".
Selected Dot Color This property is for setting color for the dot(s) displayed on selected cell of calendar.
Selected Font Color This property is for setting color for text displayed on selected segment of segmented control.
Selected Font Name This property is for setting font name for text displayed on selected segment of segmented control.
Selected Font Size This property is for setting font size for text displayed on selected segment of segmented control.
Selected Image This property is for setting image for selected stars of rating view.
Selected Values Separator String This property is for setting the separator string for the values selected in picker. If not specified default separator will be a comma(,)
Selection Image Position This property specifies if image should be displayed to the left of the row or to the right of the row. Default is left. Following are the values you can select from:- 1) Left 2) Right
Selection Indicator Image This property is for setting image that should be displayed on the selected row.
Selection Keys This property is for setting "," separated keys you want to send to WS.
Separator For Multiple Selection This property is for setting divider string for multiple selected values.Default string is ",".
Should Animate Height Change This property specifies if the change in height of textview should be animated or not while entering text into it. If enabled height change will be animated else change will not be animated.
Should Index Titles Match Section Titles This property is for showing index titles same as sectional titles. This works only if "Sections Enable" and "Indexing Enable" properties are enabled.
Should Open Links In External Browser This property is for open links displayed in webpage loaded in webview. If this property is enabled and user clicks on link it will be opened in device default browser else it will be opened in web view itself
Should Picker Data Source Load After Click This property specifies if picker data should be loaded only after clicking on it. For example if web service call is made in picker's "CLICK" event. Example scenario if picker's data is to be loaded through web service call and one of the web service call's parameters depend on another picker selected value, then data load for this picker should be done on its click event.(Note:This will only work if "WSCall" action is configured in "CLICK" event of picker)
Should Play Video In MPMoviePlayer This property is for specifying whether video should be played in native movie player or Web View. If YES video will be played in native movie player, if playback error occurs it is played in Web View.If NO video is played in Web View.
Should Repeat Items In Animation This property is for enabling repetition of tiles during slide show. works only if "Enable Slide Show" property is enabled.
Should Show All Annotations On Map Load This property is for enabling display of all annotations on map i.e, map will be zoomed in such a way that all pins added on map will be shown.
Should Show All Opened Sections This property is for enabling multiple expandable sections. If this property is enabled user can open multiple sections else only one section can be opened at a time i.e, if a sectioned is opened previous open section will be closed.
Should Tiles Animate On Long Press This property is for enabling jiggling animation of tiles when user long presses a cell for deletion. Works only if "Enable Deletion Of All Tiles on Long Press" property is enabled.
Show Detail Disclosure Button on Call Out This property is for enabling detail disclosure button on callout which appears when pin on map is tapped.
Show Info Button This property is for enabling show info button on zbar view.
Show legend for pie chart This property is for enabling flag to display legend for the Pie-Chart.
Show PopOver With Slider Value While Sliding This property is for showing popover with slider value over slider when it value is changed.
Show Tool Bar This property is for enabling tool bar. IF this property is enabled tool bar will be shown.
Shows Selection Indicator This property is for enabling selection indicator. IF this property is enabled selection indicator will be shown.
Signature Receiver Id Receiver control for signature image
Signature Stroke Width Stroke width for signature
Single Selection View Id This property is for setting "Object ID" of control whose click you want to provide single selection.
Sketch Stroke Color Color for signature stroke
Slide Show Time Interval This property is for setting time interval in seconds between showing consecutive tiles during slide show. works only if "Enable Slide Show" property is enabled.
Slider PopOver Background Color This property is for setting background color for popover, shown if "Show PopOver With Slider Value While Sliding" property is enabled.
Slider PopOver Label Text Color This property is for setting text color of text inside popover, shown if "Show PopOver With Slider Value While Sliding" property is enabled.
Slider Thumb Highlighted Image This property is for setting image of slider thumb for highlighted state.
Slider Thumb Image This property is for setting image for slider thumb.
Space Between Dashes For Dashed Border This property is for setting space between dashese in dashed border pattern for a control.
Space Between Grid Tiles
Space Between Items This property is for setting spacing between two cells.
Space between Label Text And Border
Step Value This property is for setting step increment or decrement value between consecutive values of slider.
Step Value For Picker Numerical Values This property is for setting the difference between consecutive values displayed in picker if, "Picker Numerical Bounds String" is property is set. For Example, if "Picker Numerical Bounds String" is set as 10-100, and "Step Value For Picker Numerical Values" is set to 10 , then the values will be displayed as 10,20,30...100, if "Picker Numerical Bounds String" is set as 100-10, then the values will be displayed as 100,90,80...10.
Suggestions Text Color This property is for setting color for suggestions text.
Suggestions Text Size This property is for setting font size for suggestions text.
Suggestions View BG Color This property is for setting background color for suggestions view.
Swipe Delete Button Title This property is for setting title of delete button which appears on swipe of cell.
Swipe delete enable key This property is for setting key name which corresponds to a value that specifies whether swipe delete should be enabled on a specific row or not.
Switch Off Tint Color This property is for setting color for switch off state.
Switch Thumb Tint Color This property is for setting color for switch thumb.
Table Footer View Id This property for setting "Object ID" of view that has to be shown as sectional footer.
Table Header View Id This property for setting custom view for table header.
Text Entry Restrictions This property is for setting restrictions for user input like maximum number of characters that can be entered, if only characters are allowed or only numbers are allowed etc. For multiple restriction you need to use "|||" separator. Following are the restriction you can use for this property:- 1) numbers_only :- user can enter only enter numbers. 2) characters_only :- user can enter only letters 3) alpha_numaric_only :- user can enter only alpha numerical values 4) phone_number_only :- user can enter only phone number strings 5) max_length :- user can enter only upto number of characters specified in this restriction. example usage "max_length(50)" user can only enter upto 50 characters. Examples :- 1) max_length(50) 2) max_length(50)|||numbers_only 3) alpha_numaric_only 4) phone_number_only|||max_length(10)
Text Field Left View Id This property is for setting "Object ID" of control which has to be displayed as overlay view on the left side of the text field.
Text Field Number Format This property is for setting number format for numbers to be entered by user. 'X' should be used as replacement character for numbers. for example "+ (XXX) XXX-XXX-XXXX" each X will be replaced by a number entered by user.
Text Field Right View Id This property is for setting "Object ID" of control which has to be displayed as overlay view on the right side of the text field.
Text scrolling speed on Label
textView DividerColor This property is for setting color for separator between two selected values from the list of values.
textView DividerImage This property is for setting image to be displayed as a separator between two selected values from the list of values.
TextView Height This property is for setting height of the control is you wish to set the height different from value set in "Height" property.
textView RemoveImage This property is for setting image for delete button shown besides the selected value.
Thumbs Gap
Tile Delete Button Image This property is for setting image for delete button shown when long pressed on cell. Works only if "Enable Deletion Of All Tiles on Long Press" or "Enable Deletion On Long Press" property is enabled.
Tile Delete Button X Offset This property is for setting delete button x position offset from grid view cell origin x position. Default value is -5 Used to set x offset of delete button. Works only if "Enable Deletion Of All Tiles on Long Press" or "Enable Deletion On Long Press" property is enabled.
Tile Delete Button Y Offset This property is for setting delete button Y position offset from grid view cell origin Y position. Default value is -5 Used to set Y offset of delete button. Works only if "Enable Deletion Of All Tiles on Long Press" or "Enable Deletion On Long Press" property is enabled.
Tile Normal Border Color This property is used to set border color for grid view tiles in normal state.
Tile Selected Border Color This property is used to set border color for selected grid view tile.
Titles Separator This property is for setting string separator with which "Segment Titles" property was set. If this property is not set "|||" will be taken as default separator.
Tool Bar Customization Toolbar customisation properties.
Top Inner Gradient Color This property is for setting top inner gradient color for Table View.
Top Outer Gradient Color This property is for setting top outer gradient color for Table View.
Top zooming view Identifier This property is for setting "Object ID" of view which has to be shown when scroll view is scrolled downwards to the origin.
Track Image This property is used to set tracking image on progress view.
Traffic Enabled This property is for enabling drawing of traffic data on map, if available. This is subject to the availability of traffic data. Works only if "Enable Google Map" property is enabled or "Enable Google Map" setting is enabled in "MAP" config under "Other Setting" tab and "Google Map API Key" is set in "MAP" config.
Transform Angle This property is for setting angle in degrees to which control in its normal state has to be rotated. Possible values for this property are -360 to 360.
Transform Angle For Selected State This property is for setting angle in degrees to which control in its selected state has to be rotated. Possible values for this property are -360 to 360.
Under Line Color This property is for setting underline color. Work only if "Enable Underline" property is enabled.
UnSelected Background Color This property is for setting background color for unselected segment.
UnSelected Background Image This property is for setting background image for unselected segment.
UnSelected Font Color This property is for setting color for text displayed on unselected segment of segmented control.
UnSelected Font Name This property is for setting font name for text displayed on unselected segment of segmented control.
UnSelected Font Size This property is for setting font size for text displayed on unselected segment of segmented control.
UnSelected Image This property is for setting image for unselected stars of rating view.
Use Default Refresh Control For Pull To Refresh This property is for enabling default Refresh Control for pull down to refresh functionality. If this property is enabled native refresh control will be shown when user pulls table or grid view down else custom refresh control designed based on configuration made in "Pull To Refresh" under "Other Setting" tab, will be shown.
User Interaction is Required For Page Load This property is for enabling user interaction for loading next page of rows or cell in table view or grid view. If this property is enabled next set of rows will be loaded only if user taps footer that appears after scrolling to the bottom of table or grid view else next set of rows will be loaded when user scrolls table or grid view till bottom.
Vertical Grid Line Color This property is for setting color for the horizontal grid lines of plot area.
Vertical Scroll This property is for enabling vertical navigation of gallery.
Video Quality This parameter is for setting video quality for youtube video. Works only if "Video Source" property is set to "YouTube". If video with selected quality is not available it will be played with next lesser quality. For example, if you have selected HD 1080 quality and video is not available with that quality then video will be played with HD 720 if available, else in Medium 320 quality if available, else Small 240 quality. Default quality is Medium 320 Following are the qualities you can select from:- 1) Medium 320 2) Small 240 3) HD 720 4) HD 1080
Video Quality This property is used to set quality of Video while recording. You can select from following options:- 1) High 2) Medium 3) Low 4) 640x480 5) 1280x720 6) 960x540
Video Source This property is for setting source of the video to be played in Video Player control. You can select from following options : - 1) YouTube 2) Web Url 3) Local File
View Layout Type
Weekend Cell text Color This property is for setting color for the text displayed on cells representing weekend (saturdays and sundays) of a month.
X Axis Label Rotation This property is for setting rotation angle in degrees to which labels on X-Axis has to be rotated.
X Axis Scale Labels Count This property is for setting step value of the interval at which the labels on X-Axis should be displayed.
X-Axis Label Font Color This property is for setting color for text displayed on labels of X-Axis.
X-Axis Label Font Name This property is for setting font name for text displayed on labels of X-Axis.
X-Axis Label Font Size This property is for setting font size for text displayed on labels of X-Axis.
Y Axis Label Rotation This property is for setting rotation angle in degrees to which labels on Y-Axis has to be rotated.
Y Axis Scale Labels Count This property is for setting step value of the interval at which the labels on Y-Axis should be displayed.
Y-Axis Label Font Color This property is for setting color for text displayed on labels of Y-Axis.
Y-Axis Label Font Name This property is for setting font name for text displayed on labels of Y-Axis
Y-Axis Label Font Size This property is for setting font size for text displayed on labels of Y-Axis.
Zoom level on load This property is for setting initial zoom level for map on load.
Zooming View Id This property is for setting "Object ID" of view that has to scale when zooming is about to occur in the scroll view.
Zooming View Identifier This property is for setting "Object ID" of View that should appear in middle of the gallery detail and should zoom on double tap.